The PM-FR103 provides a cost effective and easy to install solution for schools, conference rooms, auditoriums, churches, and more. Enable the connection of fiber optic source to HDMI display with female 3.5mm audio out jack and RS232.
Purelink is exciting to introduce the new PM series fiber optic wallplate extension system called PM-FT103 and PM-FR103, a part of new PM series extender category, and are designed to be compatible with 2 gang size Decora wallplate. PM-FT103 and PM-FR103 are a transmitter and receiver set for long distance transmission of video, audio and control signal over fiber optic cable. PM-FT103 and PM-FR103 are designed to transmit video (DVI, HDMI or VGA), audio (Embedded or analog stereo audio), control (RS232) over a pure two strand fiber optic cable for long distance up to 6,600ft. This optical connection enables to minimize electrical noise and EMI free that is ideal for long distance extension of high definition HDMI/DVI or VGA video signal, HDMI embedded audio or 3.5mm stereo analog audio, and control signal. Because transmission of content is greatly secure and immune to outside interference, fiber optic extension systems are favored in government, military, school and medical environment.
Fiber optical cabling between Transmitter and Receiver | |
Type / Number of fiber | 2 Strand fiber optic cable, 50/125 µm or 62.5/125 µm multimode & singlemode |
Connector | 2 Female LC connectors |
Operating distance | Up to 6,600 ft ( 2000m ) singlemode / up to 1,650 ft ( 500m ) multimode |
NOTE: Operating distance is approximate. This is a typical distance. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, bandwidth, connector splicing, losss, bend radius and environmental factors. |
|
Nominal peak wavelength | 850 nm (Multimode) 1310nm (Singlemode) |
Transmission power | |
Singlemode | -5 dBm, typical |
Multimode | -5 dBM, typical |
Maximum receiver sensitivity | |
Singlemode | -17 dBm, typical |
Multimode | -11 dBm, typical |
Optical loss budget | |
Singlemode | 12 dB, Max |
Multimode | 8 dB, Max |
Video | |
Maximum Channel Data Rate | 3.40 Gbps per color |
Pixel clock | 165 MHzz |
Supported resolution | Up to 1920 x 1200 / 1080p @ 60Hz single link / 4K2K (Optional) / 3D (up to 6,600ft) Singlemode Up to 1920 x 1200 / 1080p @ 60Hz single link / 4K2K (Optional) / 3D (up to 1,650ft) Multimode |
Formats | RGB & YCbCr digital |
Standard | DVI 1.0, HDMI 1.4 |
HDCP support | Yes |
Audio | |
Connector | 3.5mm Mini Jack Stereo Audio |
Gain | Unbalanced output: 0 dB, Balanced output +5 dB |
Frequency response | 20Hz, ±0.05dB |
Impedance | >10K ohms(input) 50ohms (unbalanced output) 100 ohms (balanced output) |
Nominal level | -9dBV |
Maximum level | +6 dBV (Unbalanced, input), > ±16 dBu (balanced output) |
Video connector - Transmitter & Receiver | |
Signal Type | Single link HDMI, HDMI loop-out |
Connector | Female HDMI (2) |
Control - external device (Pass-thru, bidirectional) | |
Serial control port | |
Transmitter | 3 Female Phoenix connector, (Tx, Ground, Rx) |
Receiver | 3 Female Phoenix connector, (Tx, Ground, Rx) |
Baud rates | Support up to 115200 |
General Information | |
Power supply | External adapter - Input: 100-240 VAC, 50-60 Hz, Output: 12VDC, 4.1A, 13 W, max |
NOTE: Both transmitter and receiver extender need to be powered locally by provided external power supply adapter. |
|
Power consumption | |
Tramsmitter | 7 watts |
Receiver | 7 watts |
Cooling | Convection |
Mounting | Mounting ears for ceiling and in-wall installation |
Dimension | 6.3' (w) x 4.' (d) x 1.7' (h) |
Weight | 1.77 lbs per receiver, 1.77 lbs per transmitter |
NOTE: All nominal levels are at ± 9% NOTE: Specifications are subject to change with or without notice. |